The Precision T7610 has all the base components to be converted in to a high end gaming computer.  Precision T7610’s are a dual socket Xeon based workstation.  They utilize a standard 1300W Power Supply, which gives you endless options for high end Graphics Cards.  Let us show you how you can build an effective Precision T7610 Gaming PC.

Where to buy?

If you haven’t already acquired a Precision T7610 we’d recommend checking out a company called Serverworlds.  They sell the T7610’s cheap and they provide free ground shipping to the lower 48 states.  You can click on this link and it’ll bring you directly to there T7610 Page: Precision T7610 Link.  You can also try to snag them cheap on Ebay.  However, Ebay can be a bit of a gamble because you never know what you are going to get.

The goal is to purchase the T7610 with a good processor(s) and memory already installed and then you can source the graphics cards, hard drives, and other optional components from other sources.

 

What Processor(s) should I get?

High Clock speed cpu’s are the way to go.

In most cases you can get by with a single processor listed below.  If you plan to stream your gaming on youtube or twitch, we recommend getting 2 processors.

Recommended Processors:

Up to 2 x QC Xeon E5-2637 V2 3.50Ghz 15MB 8GTs Processors | 3.8Ghz Max Turbo Frequency (SR1B7)

Up to 2 x 6C Xeon E5-2643 V2 3.50Ghz 25MB 8GTs Processors | 3.8Ghz Max Turbo Frequency (SR19X)

Up to 2 x 8C Xeon E5-2667 V2 3.3Ghz 25MB 8GTs Processors | 4.0Ghz Max Turbo Frequency (SR19W)

Up to 2 x 8C Xeon E5-2687W V2 3.4Ghz 25MB 8GTs Processors | 4.0Ghz Max Turbo Frequency (SR19V)

 

How much Memory should I get?

The base line should be a minimum of 16GB of memory.  However, 24GB to 32GB would be ideal.

Memory PNs:

4GB 1Rx8 ECC 14900R DDR3 Module (7826W)

8GB 2Rx8 ECC 14900R DDR3 Module (25RV3)

8GB 1Rx4 ECC 14900R DDR3 Module (T0F69)

16GB 2Rx4 ECC 14900R DDR3 Module (12C23)

 

Recommended Memory configurations:

4 x 4GB PC14900R ECC Reg Modules (16GB)

6 x 4GB PC14900R ECC Reg Modules (24GB)

4 x 8GB PC14900R ECC Reg Modules (32GB)

6 x 8GB PC14900R ECC Reg Modules (48GB)

It’s very important to use 14900R modules because they will run at the max speed supported by the system board and processor(s).

 

What Hard Drive should I get?

Ideally you would want to have a Solid State Drive as your boot device as well an NVME.2 SSD to store your game libraries/large programs on.  If you are limited on budget you could go with a small SSD for your boot device and a larger capacity 7.2K SATA drive to hold your larger files/programs/games.

 

Recommended SSD Drives:

Samsung 860 EVO 1TB 2.5 Inch SATA III Internal SSD (MZ-76E1T0B/AM)

Samsung 860 Evo 500GB 2.5 inch SATA III Internal SSD (MZ-76E500B/AM)

 

Recommended large Capacity SATA Drives:

Seagate 2TB BarraCuda SATA 6 Gb/s 7200 RPM 64MB Cache 3.5 Inch Desktop Hard Drive (ST2000DM006)

Seagate 3TB Barracuda SATA 6Gb/s 64MB Cache 3.5-Inch Internal HDD (ST3000DM008)

Seagate 6TB IronWolf SATA HDD 6Gb/s 256MB Cache 3.5″(ST6000VN0033)

 

*NVME.2 Drives cannot be used as a boot device with this model workstation*

NVME.2 PCIe Adapter (You need this if you plan to install an NVME.2 Drive in to this system):

NVME.2 SSD Adapter *Required to Install NVME.2*

 

Recommended NVME.2 SSDs:

WD Black 512GB M.2 2280 PCIe NVME SSD (WDS512G1X0C)

Samsung 960 EVO Series – 500GB NVMe – M.2 Internal SSD (MZ-V6E500BW)

Samsung 960 EVO Series – 1TB PCIe NVMe – M.2 Internal SSD (MZ-V6E1T0BW)

 

Raid Controllers:

LSI 2308 Integrated 6GBPS SAS/SATA Controller (Supports Raid 0, 1, or 10)

LSI 9271-8i 6GBPS SAS/SATA Controller (Supports Raid 0, 1, 5, or 10)

 

What Graphics Card should I get?

The Precision T7610 features a standard 1300W Power Supply.  The 1300W Power Supply will give you pretty much endless options for graphics cards.

 

Recommended Graphics Cards:

EVGA NVIDIA GTX1660 Ti 6GB Graphics Card

EVGA NVIDIA GTX1070 8GB SC Graphics Card

EVGA NVIDIA GTX1070TI 8GB Graphics Card

EVGA NVIDIA GTX1080 SC 8GB Graphics Card

EVGA NVIDIA GTX1080 TI 11GB SC2 ICX Technology Graphics Card

EVGA NVIDIA RTX 2060 6GB Graphics Card

EVGA NVIDIA RTX 2070 8GB Graphics Card

EVGA NVIDIA RTX 2080 8GB Graphics Card

EVGA NVIDIA RTX 2080 Ti 11GB Graphics Card

 

What type of Monitor should I get?

Ideally it would be nice to get a monitor with a 144Hz or 244hz refresh rate or better monitor.  However, it really depends on the games you play.  If you play first person shooter games a 144hz or 240Hz or better monitor is a must.  If you play other games that do not require quick response time then a 60hz monitor should work fine.

Recommended Monitors:

ASUS PG248Q Full HD 144Hz 1MS 24″ Gaming Monitor

ASUS VG278Q Full HD 1080P 144Hz 1MS 27″ Gaming Monitor

ASUS XG258Q ROG Strix 24.5″ 1080P 240Hz 1MS Gaming Monitor

 

Recap:

Using the criteria above you can help you build a high end gaming system using a Precision T7610 Workstation.

 

Sample Configuration:

Precision T7610 Workstation

2 x QC Xeon E5-2637 V2 3.5Ghz 15MB 8GTs

32GB PC14900R (4 x 8GB)

Samsung 256GB 6GBPS SSD + 512GB Samsung Evo NVME

GTX1080 TI w/11GB  Graphics Card

1 x 10/100/1000 Network Port

1300W Power Supply

DVD-RW

10 Pro 64Bit

 

I have tested this system with games like Dota 2, CS Go, PubG, Overwatch, and The Division.  The frames can range from 90FPS to 200FPS depending on the game and settings that you choose.  The system was tested using a 144Hz 27″ Acer Monitor.

 

Accessories:

SteelSeries QCK Heavy Cloth Gaming Mouse Pad (Click Here)

SteelSeries Apex M750 RGB Mechnical Keyboard (Click Here)

Logitech G502 Proteus Spectrum RGB Tunable Gaming Mouse (Click Here)

HyperX Cloud II 7.1 Gaming Headset (Click Here)

El Gato Game Capture HD60 Pro for a Streaming Capture PC (Click Here)

Secretlab Premium Gaming Chairs (Click Here)

 

Videos:

Precision T7610 Complete Gaming Build

How to install Memory in to a Precision T7610 Workstation

How to install an NVME SSD in to a Precision T7610 Workstation

How to install Raid 10 on the Precision T7610 Integrated LSI 2308 Controller

How to install Processors in to a Precision T7610 Workstation

How to replace a Precision T7610 Power Supply

T7600 T7610 T7910 3,5″ Hard Drive Tray Install

T7600 T7610 T7910 SSD Hard Drive Tray Install

Please contact us if you have any questions!