This article will give you the part numbers and pictures to all of the components that you will need to add a 5.25″ Hard Drive Cage to your Precision T3600, T3610, T5600, T5610, T5810, or T7810.  This kit will allow you to add up to 2 x 2.5″ SAS/SATA Hard Drives.  (SAS Controller is required to use SAS Drives)  You can then use the drives for additional storage or an internal backup device.

 

Metal Cage PN: 88PWP

Fan: CGRWD

SATA Power Splitter Cable PN: N701D

5.25″ Mesh Cover PN: Uknown

Laptop HDD Screws PN: Unknown

2.5″ Plastic Drive Trays PN:  1B31P6100-600-G  (You need 2)

 

You will also need 2 x Straight end SATA cables.  20″ would get the job done.

 

Now you have the PN’s to go out and buy this kit.

 

Feel free to contact us if you have any questions!